Filter Product Designs: Ashing Filter

The filter has been approved and permitted by environmental authorities in several states.

The PDC Ashing Filter is used to deposit fly ash, cement, kiln dust, and other dry powder products into open pits, environmental roll-on roll-off boxes, barges, and other enclosures. The centrifugal process of the cyclone separator allows the product to fall out of the product/air stream by gravity. The conveyance air is filtered through the fine filter bag housing before it is released to the atmosphere. Product takes one path while conveyance air takes another. The result is a safe working environment, protecting personnel and equipment, with no product loss or pollution.

The PDC Vent Line filter and the PDC Bashing filter operate without the use of electricity or high pressure air. They operate without moving parts and are portable.

Pond Solidification

Click on photo below to play video
Video Loading 10.7 MB ·Long arm excavator suspends filter.
·Truck's blower conveys product using air pressure to PDC Ashing Filter.
·Conveyance air is filtered while product is deposited into sludge.

Pond Solidification
Long arm excuvator suspends filter Long arm excuvator suspends filter
To deliver fly ash and cement in an environmentally sensitive area the Ashing Filter is positioned with a backhoe over the pond.

Dry Powder Product into Containers
Truck's blower conveys dry powder product using air pressure to PDC Ashing Filter into Geo sack container Truck's blower conveys dry powder product using air pressure to PDC Ashing Filter into Geo sack container
Injecting waste with dry powder inside geo sack container.
Ashing into roll on roll off boxes from pneumatic truck Ashing into roll on roll off boxes from pneumatic truck
Mixing dry powder with sludge inside a roll-on roll-off container.


Specifications:

Physical Dimensions
Inlet 4 in
Outlet 4 in
Vent/Purge 3 in

Diameter

30 in

Height

9 Feet

Material

Carbon Steel

Ratings

Model:

# 9-1400 #16-2400

Square Feet of Cloth Area

45 80

Inlet CFM Max.

3000 3000

Loading Maximum @ 3%

500 lbs 800 lbs

Normal CFM @ 1 psi

1400 2400

CFM per. Square Foot (depends on product characteristics)
Efficiency Rating @ 2800 Blaine 99.97
*Discharge Rate @ 5 Micron <00.05 lbs per hr. @ 100 lbs/cfm